How do I fix my Canon g2000 blinking 7 times? Press and hold Stop button, and then release button when Alarm lamp flashes 7 times. The machine is set to transporting mode and turned off. STOP/RESET, or COLOR START button for 5 to 15 sec. The ink monitor will shut off, the printer will stop blinking, and the printer itself will resume printing. Check1 Press ON button. Check2 Make sure power plug is securely connected to machine, and then turn it back on. Check3 Unplug machine, leave it for at least 2 minutes, and then plug it back in and turn it on again. If this does not solve the problem, contact your nearest Canon service center to request a repair. Example of 2 times flashing: (A) Flashes (B) Goes off. Number of flashes. Cause. Support Code. 15 flashes. Print head (cartridge) cannot be recognized. 1472. Support Code Corresponding to Number of Alternate Flashes of ON Lamp and Alarm Lamp. G2000 series; Troubleshooting; Lights green after flashing when the power is turned on. Note. ON and Alarm lamps You can check the status of the machine by the ON and Alarm lamps. - ON lamp is off: The power is off. - ON lamp lights green: The machine is ready to print. .

canon g2000 blinking 15 times